Lifting Chain. Email Us.
If using a hacksaw to cut your wire rope, wind tape around wire to ensure a neat cut. Balustrade Quick links.
Pad Eyes and Eye Plates. Interior Fittings. Ex VAT. Viewed Show prices. Besides better quality products, this kind of service is another reason why we like to buy USA-manufactured products from a reputable company.
Petersen also took the opportunity to address some of the other common shortcomings they saw in the products already on offer. Tri-Flow Locking pliers e. Make sure the cable cutter is held perpendicular to the wire to get a square cut. Outer strands should be evenly situated around the wedge.
Sta-Lok Fittings. After crimping, loosen the bolts and confirm with a caliper that the dimensions of the crimp meet the specified diameter in our case, 0. Before attaching any terminals to the new wire, we inspected all hardware and confirmed that the threads on the new hand crimp terminals matched that on the installed hardware, i.
Top, Position the crimp tool over the barrel of the terminal. Marine Rope. Finally the decision was made to use high-grade materials throughout so that the fitting wouldn't need to be filled with sealant on assembly.
Closed Body Marine Turnbuckles. Mooring and Anchor Ropes. By disconnecting the lifeline at the aft turnbuckle at the pushpit, we could remove the lifeline up to and including the gate, leaving the remaining forward section intact.
Eye Bolts and Eye Nuts. This turnbuckle needs replacement. Lifting Chain Slings.
Wire Rope Ferrules. As an aside, for continuous pulpit to pushpit lifelines, one design option is to connect the lifeline to the pushpit, as well as the pulpit, using braided small diameter polyester line, rather than turnbuckles.
The cone angle was reduced to give better grip on compacted strands such as Dyform.