Epson xp 400 missing lines when printing

Epson xp 400 missing lines when printing

Now we too are having the same troubles with the black not printing or just barely printing. If the problem persists, replace the black ink cartridge. You will want to run both the eliminate light stripes and eliminate smears procedures. If necessary, check the light stripes test page to determine the color and jet number of the missing jet.

And do you have a home printer?

epson xp 400 missing lines when printing

At the install printer software screen choose "Epson" under "Manufacturer" and LQ-1050 for the printer, then click "Next". Running a Printer Check 1.

Helpful 2. If the light is flashing, replace the appropriate ink cartridge. The Epson tech was nice and helpful but the problem continues. Was this answer helpful?

epson xp 400 missing lines when printing

Hold down both buttons until the On light begins to flash, then release the buttons. All you have to do is press and hold the Stop button for at least 3 seconds until the On light starts flashing.

Epson XP-410 printer skipping lines when printing in black ink?

Make sure that the Media Type selected in the printer software is appropriate for the type of media loaded in the printer. Prints a couple lines and then none for about 4 lines, then 2 more lines and continues down page such as that. Make sure that the printer is on a flat, stable surface that extends beyond the printer base in all directions. I kept doing it about 15x until there were no more changes in the printed pattern. You cannot clean the print head if the any of the cartridges are expended.

epson xp 400 missing lines when printing

Most Helpful Answer. Related Questions My Epson Inkjet Printer doesn't print out black ink even after a new ink cartridge is installed!? There must be a design flaw in the cartridge. Score 0.

epson xp 400 missing lines when printing

Answer questions, earn points and help others Answer questions. Epson WorkForce WF-4630... It is not that there are spots of ink missing like low ink but there are completely printed lines of the text and then completely blank lines where there should be text. Under Setup, select "Maintenance" 3. Here's a solution that worked for me!

Why is my printer skipping lines of text?

How do I stop the printer when I wanted to print a few pages, but it is printing an entire document? If weak or missing jets still persist, continue with step 8. Yes No.