How to stop a leaking tap spindle

More Stories DIY: News Prawn trawler on borrowed time, court told.

How to fix your leaking taps

Make sure the new spindle is in the off position and screw it into the tap base and tighten with a shifter. Next take off the handle. Step 1: Empty the line I usually find the lowest point, like a bath or outside tap, and turn on both hot and cold until the pressure has gone down to a drip. With your shifter, undo the top nut; usually it also is the hot and cold button.

Tools you'll need: If you're in a duplex or unit you may share one with your neighbours, so you should have an isolation tap in the garage or near the hot water tank. Remove the leaking tap With your shifter, undo the top nut; usually it also is the hot and cold button. Go back inside and check your tap - fingers crossed it's not leaking. For some reason, when it comes to plumbing issues, men hate fixing them or calling a plumber.

How To Fix A Leaky Tap

Now screw on the brass-locking nut and tighten firmly with a shifter. A re-seating grinds the tap base flat so the spindle and or washer sits flat, but usually you won't need to do this. With your shifter unscrew the large brass-locking nut, followed by the small nut on the spindle itself.

Top Stories. In a house you'll usually find your water main at the front boundary, either on the right or left adjoining boundaries. This will take out any knocking and backpressure when you turn on the main.

how to stop a leaking tap spindle

The new one blue should fix it. The rubber washer at the bottom has worn away causing leakage.

how to stop a leaking tap spindle

Now is a good idea to give the whole area a clean with a rag. It should be loose enough to do it with your hands.

how to stop a leaking tap spindle

I usually find the lowest point, like a bath or outside tap, and turn on both hot and cold until the pressure has gone down to a drip. How to patch a hole in plaster wall DIY: You can check if it's off by turning on the nearest tap. Baring all for the exposed rustic brick wall Show More.

Leaking stop tap repair

I couldn't remember which one it was at the time. If it is leaking, you will have to buy a re-seating tool and start the process again.

Very slowly turn the main back on.

how to stop a leaking tap spindle