When you are done smearing the product, let it sit for a couple of minutes.
If you have any questions, I will be around to answer, so go ahead and ask. What type of polish is that you mentioned?
By this point your car should look awesomely shiny but it might show the pattern that you followed with the polish if you see it under direct light. Do this to the entire car.
The strips need to be long rather than wide in order to dip half of them in water. My Name, All Rights Reserved. Step Five: With your materials chosen and bought, you're ready to get started.
I started a trade in the automotive body and refinishing industry which is the family trade. To Sand or Not to Sand…. What kind of pad do i need to use after new paint and clearcoat,and sanding it with 1500 grit sandpaper.
This will ensure you sand the entire surface evenly. The palm sander will leave swirl marks in the paint and clear coat. Terms and Conditions: As you sand, you will likely feel a fair amount of fatigue in your hands and arms.
And here is another tip: Whether you're talking about paint, primer, bare metal or anything in between, your car's body can be smoothed by wet sanding.
You cannot use a palm sander to wet sand. Make sure not to overdo it, as you could ruin your paint. Some articles have YouTube videos embedded in them. If your sanding does not seem to be affecting the clear coat, apply a little more pressure so it will.
Roadkill's Small Block Blaze 01: Street Rodder How To. Article Summary X To wet sand a car, soak 1200 or 1500 grit sandpaper in a mixture of water and automotive or dish soap for 5 minutes.
Repeat this step until you are satisfied with the result, it usually takes about 2-3 passes to obtain an awesome shine. Do this from time to time to check your progress. That's the reason why you will need to do this step. Moving on:.
Be sure you rinse it thoroughly because you will need to apply a glaze or wax to the area once it dries.